PFAS contamination is a serious problem in firefighting because the same chemical compounds that make firefighting foams highly effective at suppressing fuel fires also make them extraordinarily persistent in the environment. Once released, PFAS substances do not break down naturally. They accumulate in soil, groundwater, and living organisms long after a fire has been extinguished. The sections below explain how this contamination happens, what it means for human health, why it is so hard to reverse, and what the fire safety industry is doing about it.
How does PFAS end up in the environment from firefighting?
PFAS enters the environment from firefighting primarily through the discharge of aqueous film-forming foam, commonly known as AFFF. When AFFF is applied to suppress fuel fires or used in training exercises, the liquid runoff carries PFAS compounds directly into the surrounding soil and drainage systems. From there, they migrate into groundwater and surface water. Even a single training event can release measurable quantities of these substances into the local environment.
The problem is not limited to major industrial incidents. Routine fire training at airports, military installations, and industrial facilities has historically involved repeated AFFF use over decades. Each discharge leaves a chemical residue that does not evaporate, does not biodegrade, and does not stay on the site. PFAS molecules are water-soluble and highly mobile. They travel with precipitation and groundwater flow far beyond the original application point.
Contamination also occurs through less obvious pathways. Fire suppression systems in aircraft hangars, fuel storage facilities, and manufacturing plants contain AFFF concentrate that can leak from ageing pipework or be released during system testing. Wastewater treatment plants are generally not designed to remove PFAS, so even treated effluent can carry these compounds into rivers and reservoirs that supply drinking water. Decades of AFFF use have left measurable PFAS contamination at thousands of sites across Europe and North America.
What health risks are linked to PFAS exposure in firefighters?
Firefighters face higher PFAS exposure than the general population. They handle AFFF concentrate directly, work in environments where foam has been discharged, and can absorb PFAS through skin contact, inhalation of aerosols, and incidental ingestion. Research consistently links occupational PFAS exposure to a range of serious health outcomes, including elevated cholesterol levels, immune system disruption, thyroid dysfunction, and increased risk of certain cancers.
The health risks are compounded by the bioaccumulative nature of PFAS. The human body does not metabolise or excrete these substances efficiently, so repeated low-level exposures accumulate over a career. A firefighter who regularly works with AFFF over twenty or thirty years builds up a body burden that increases the probability of long-term harm, even if individual exposures appear modest.
Reproductive health is another area of concern. Some PFAS compounds are associated with disrupted hormone function, reduced fertility, and adverse pregnancy outcomes. Children of firefighters with high PFAS body burdens may also face developmental risks. These findings have increased pressure on fire services and equipment manufacturers to eliminate PFAS from their operational toolkit. The aim is to protect the environment and the people who depend on these products every day.
Why is PFAS so difficult to remove from water and soil?
PFAS is exceptionally difficult to remove from water and soil because of the carbon-fluorine bond at the core of its molecular structure. This is one of the strongest bonds in organic chemistry. It is why PFAS compounds resist heat, acids, biological activity, and most conventional chemical treatment. Water treatment technologies that remove conventional pollutants do not break this bond, so PFAS passes through standard filtration largely intact.
In soil, PFAS binds to organic matter and clay particles while remaining water-soluble enough to leach downward into aquifers. This dual behaviour makes containment extremely challenging. Excavating contaminated soil is expensive and logistically complex. Even when contaminated material is removed, trace PFAS concentrations in groundwater can persist and continue spreading. Pump-and-treat systems can reduce groundwater concentrations over time, but remediating a heavily contaminated site can take decades and cost tens of millions of euros.
Advanced treatment technologies such as granular activated carbon filtration, high-pressure membrane systems, and electrochemical oxidation can reduce PFAS concentrations in water to very low levels. However, they are energy-intensive, expensive to operate, and generate concentrated PFAS waste streams that themselves require specialised disposal. The practical implication is that once PFAS contamination is established at a site, prevention is almost always more cost-effective than remediation. This is a central driver behind the regulatory movement to phase out PFAS-containing firefighting agents before contamination spreads further.
Which regulations are phasing out PFAS in fire suppression agents?
European regulation is actively phasing out PFAS-containing extinguishing agents through Regulation (EU) 2025/1988, which establishes a framework for restricting per- and polyfluoroalkyl substances in fire suppression applications, with a complete ban anticipated by 2031. This regulation reflects the European Union’s broader PFAS restriction strategy under REACH, which treats the entire class of PFAS substances as substances of very high concern rather than assessing individual compounds in isolation.
The European approach is significant because it closes a loophole that previously allowed manufacturers to replace one regulated PFAS compound with a structurally similar but unregulated alternative. By targeting the entire PFAS chemical class, the regulation requires a genuine transition away from fluorinated chemistry rather than a reformulation exercise. Fire safety equipment distributors and end users in European markets should plan their product transitions now. The 2031 deadline falls within the typical life cycle of installed suppression systems.
Beyond Europe, regulatory momentum is building globally. Several US states have enacted or proposed restrictions on PFAS-containing foams, and international bodies including the International Civil Aviation Organization have updated guidance on AFFF alternatives at airports. The direction of travel is consistent across jurisdictions: PFAS in firefighting is being phased out. The question for fire safety professionals is not whether to transition, but when and to what alternative.
What are the PFAS-free alternatives to traditional firefighting foam?
PFAS-free alternatives to traditional firefighting foam include fluorine-free foams, compressed air foam systems using non-fluorinated concentrates, dry chemical agents, and water-based suppression technologies with environmentally safer additives. Each has strengths and limitations that depend on the fire class and application. Selecting a substitute means assessing the specific risk being protected.
For fuel fires, fluorine-free foams have advanced considerably and are now approved for use in many aviation and industrial applications where AFFF was previously considered essential. Lithium-ion battery fires are more complex because they behave differently from conventional fuel or solid-material fires. Thermal runaway in lithium-ion cells generates heat from internal chemical reactions. These reactions can continue after visible flames are suppressed, so extinguishing the flames does not necessarily end internal heating, gas release, or the risk of reignition. Sustained cooling and reignition prevention are therefore critical requirements, and not all PFAS-free alternatives meet them equally well.
Hydrogel, developed by Anogas, is one example of a PFAS-free technology engineered for this challenge. It is a water-based agent containing modified natural clay. Its viscosity increases when it is exposed to heat, which is intended to keep the agent in contact with hot battery surfaces so that it can provide sustained cooling, help suppress flammable gases, and reduce the risk of reignition. How well it performs depends on whether the agent can reach the affected cells, the battery configuration, and how the agent is delivered. An externally applied agent will not necessarily reach cells inside an enclosed pack or stop every internal reaction. Because Hydrogel is designed to be interchangeable with water, it can be used in water-based fire suppression systems, but suitability depends on the complete setup. Assess battery access, enclosure design, agent quantity, nozzle and discharge arrangement, and any required approvals before assuming an existing installation is compatible. For portable applications, handheld extinguishers filled with Hydrogel offer a PFAS-free option for first-response use.
Should fire safety distributors switch to PFAS-free products now?
Yes, fire safety distributors should begin transitioning to PFAS-free products now rather than waiting for regulatory deadlines. Tightening legislation, growing liability exposure, and rising customer demand for environmentally compliant products make early adoption commercially advantageous. Distributors who establish PFAS-free product lines before the 2031 European ban will be better positioned than those who delay and face a compressed transition with constrained supply and increased competition.
The commercial case is reinforced by the changing risk landscape that distributors’ customers face. The rapid growth of electric vehicles, energy storage systems, e-bikes, and portable electronics means lithium-ion battery fire risk is expanding into warehousing, logistics, residential buildings, maritime operations, and recycling facilities. These customers need fire suppression solutions that address battery fire behaviour specifically, not just conventional fire classes. A PFAS-free product that is also designed for lithium-ion battery fires addresses both the regulatory transition and the emerging risk in a single product decision.
From a liability perspective, continuing to stock and sell PFAS-containing products carries increasing risk as environmental contamination claims against AFFF manufacturers and users progress through courts in multiple jurisdictions. Distributors who shift their portfolios early reduce their exposure to future regulatory non-compliance and reputational harm.
Anogas’s Hydrogel technology shows what a differentiated PFAS-free product can look like in practice. Hydrogel is tested to KIWA NTA 8133 for lithium-ion battery fire applications. That result applies to the specific extinguisher model and test scope, so verify the evidence against your own application. It is not approval for every battery size, installation, or marine system. Hydrogel is designed for use with water-based systems, subject to the engineering and approval checks described above. Its life cycle includes recyclability into compost-enrichment material after a ten-year service life. For distributors comparing options, understanding how Hydrogel works as a suppression mechanism provides a useful reference point for what PFAS-free performance can look like when the technology is purpose-built for modern fire risks rather than adapted from conventional foam chemistry.
Gerelateerde artikelen
- How do you extinguish a lithium-ion battery fire safely?
- What Makes Hydrogel Suitable for Electric Vehicle Fire Suppression
- Understanding Hydrogel Fire Suppression for Industrial Environments
- Understanding Hydrogel Fire Suppression for Industrial Environments
- What PFAS-Free Fire Suppressant Means for Fire Safety at Home


