What is thermal runaway in a lithium-ion battery?

Thermal runaway in a lithium-ion battery is a self-reinforcing chain reaction. Rising internal temperature triggers chemical decomposition, which generates more heat, which accelerates further decomposition, until the cell vents, catches fire, or explodes. It is one of the most dangerous failure modes in modern energy systems because the energy driving the reaction comes from inside the battery itself. Once it begins, it is extremely difficult to stop.

Any lithium-ion battery, in an electric vehicle, an e-bike, a power tool, or a smartphone, is capable of thermal runaway if it is mechanically damaged, overcharged, or exposed to excessive heat. The risk has grown as lithium-ion batteries have become embedded in homes, workplaces, warehouses, and public infrastructure.

The sections below answer the most important questions about thermal runaway: what causes it, how it spreads, how to recognise it, why it is so hard to fight, and what can be done to prevent and extinguish it.

What causes thermal runaway in a lithium-ion battery?

Thermal runaway is caused by any event that raises internal cell temperature to the point where heat-generating reactions become self-sustaining. The three most common root causes are mechanical damage, electrical abuse such as overcharging or short-circuiting, and external heat exposure. Once internal temperature crosses a critical threshold, decomposition reactions release energy faster than the cell can dissipate it.

Inside a healthy lithium-ion cell, the electrolyte, separator, anode, and cathode exist in a carefully controlled chemical balance. A physical impact that punctures the separator, charging current beyond the cell’s design limits, or an external heat source can disrupt that balance. The separator can then break down, allowing direct contact between the anode and cathode. The result is a short circuit and a rapid, uncontrolled release of stored energy.

As internal temperature climbs, the electrolyte decomposes and releases flammable gases, including hydrogen and methane. The cathode material also becomes unstable at elevated temperatures and can release oxygen, which feeds combustion from within the cell. Internal fuel, internal oxygen, and escalating heat make thermal runaway fundamentally different from a conventional fire.

How does thermal runaway spread from one battery cell to another?

Thermal runaway spreads from cell to cell through thermal propagation. When one cell fails, its heat transfers to neighbouring cells through direct contact, radiation, and hot gases. If those cells absorb enough heat to cross their own thermal runaway threshold, they begin the same decomposition sequence. The result is a cascading failure that can rapidly engulf an entire battery module or pack.

This cascade makes lithium-ion battery fires in large systems destructive and difficult to control. Electric vehicle battery packs, energy storage installations, and warehouse racking of e-bikes are typical examples. A fire that starts in a single cell can propagate through dozens or hundreds of cells in minutes.

The geometry and density of the pack influence how quickly propagation occurs. Tightly packed cells with minimal thermal separation give heat fewer barriers to cross. In large-format installations, enclosures can also trap heat and accelerate propagation by limiting dissipation to the surroundings.

Gas release can continue even after visible flames appear to be out. Flammable gases venting from cells that are still reacting can reignite if a heat source remains nearby. This is one reason interrupting thermal propagation matters as much as suppressing visible flames.

See where Hydrogel fits your fire-safety strategy
From lithium-ion batteries to existing water-based suppression systems, speak with Anogas about your application.

Discuss your application

What are the warning signs of thermal runaway?

The warning signs of thermal runaway include unusual heat from the battery, swelling or deformation of the casing, hissing or crackling caused by internal gas pressure, a sharp chemical smell, and visible smoke or discolouration. These signals indicate that internal decomposition may already have begun and that the situation can escalate quickly.

In practice, the observable signs typically follow this pattern:

  1. Abnormal heat: The battery or device becomes noticeably hot to the touch, well beyond normal operating warmth.
  2. Physical swelling: Internal gas pressure causes the battery casing or device housing to bulge or deform.
  3. Audible signs: Hissing, popping, or sizzling indicates that internal pressure is building and gases are being released.
  4. Odour: A sharp, acrid or solvent-like smell signals electrolyte decomposition and gas venting.
  5. Smoke: Visible smoke, often white or grey, usually precedes open flame and indicates that flammable gases are being released in significant quantities.
  6. Open flame or explosion: If the earlier signs do not prompt a response, the cell may vent catastrophically and ignite.

Intervention is far more effective at the swelling or hissing stage than after open flames have appeared. Once a battery is venting visibly, the window for safe manual intervention is extremely narrow.

Why is a lithium-ion battery fire so hard to extinguish?

A lithium-ion battery fire is hard to extinguish because the energy sustaining the reaction comes from inside the cells, not from external fuel. Extinguishing agents can suppress visible flames, but suppressing flames does not necessarily end internal heating, gas release, or thermal runaway. The battery can therefore reignite even after the fire appears to be out.

Water shows both the strength and the limitation of conventional agents. It is effective at absorbing heat and can control a lithium-ion battery fire when applied in sufficient quantity and with access to the cells. However, it runs off quickly and may not reach cells inside an enclosed pack. Once the water evaporates or drains away, residual heat and continuing reactions can restart the fire. Large volumes are often needed, and the contaminated runoff creates a secondary environmental problem.

The gases produced during thermal runaway add another layer of complexity. Hydrogen and methane are highly flammable and can accumulate in enclosed spaces, creating an explosion risk. Hydrogen fluoride, also released during thermal runaway, is toxic and corrosive and endangers firefighters and bystanders. These gases can continue venting after flames have been suppressed, so the hazard does not end when the fire appears to be out.

Foam agents face a different problem. Many rely on PFAS-based chemistry, which raises environmental concerns and is subject to increasingly strict regulation across Europe. Dry chemical and CO2 systems can knock down flames but provide little sustained cooling. An approach that addresses the full thermal runaway lifecycle needs sustained cooling, gas management, thermal isolation, and measures against reignition. That differs from a conventional extinguisher designed for ordinary combustible or flammable-liquid fires.

How can thermal runaway be prevented?

Thermal runaway can be prevented through safe charging practices, proper storage, regular inspection for physical damage, and appropriate fire protection where lithium-ion batteries are used or stored. No single measure eliminates the risk, but each layer significantly reduces the probability of a thermal event.

Operational and storage practices

  • Use manufacturer-approved chargers: Chargers not matched to the battery’s specifications can deliver incorrect voltages or currents, a leading cause of thermal runaway.
  • Avoid charging unattended or overnight: Charging in an occupied, monitored space allows early warning signs to be detected before a situation escalates.
  • Store batteries at moderate temperatures: Extreme heat accelerates electrolyte degradation. Do not store batteries in direct sunlight, in hot vehicles, or near heat sources.
  • Inspect for physical damage: Remove batteries that have been dropped, crushed, or punctured from service immediately, even if they appear to function normally. Internal damage can trigger thermal runaway hours or days after the initial impact.
  • Avoid deep discharge: Repeatedly draining a lithium-ion battery to zero degrades the cell chemistry and increases the risk of instability during later charging cycles.

Infrastructure and system-level protection

  • Install thermal monitoring: Battery management systems in larger installations can detect abnormal temperature rises and disconnect power before a thermal event develops.
  • Maintain adequate ventilation: Good airflow around battery storage areas helps dissipate heat and reduces the risk of flammable gas accumulation.
  • Segregate stored batteries: In warehouses or recycling facilities, keeping lithium-ion batteries separate from other combustibles limits the consequences of a thermal event.
  • Fit appropriate suppression systems: Environments with significant concentrations of lithium-ion batteries, such as EV charging points, energy storage rooms, and battery recycling areas, benefit from suppression systems designed for this fire class.

What is the best way to extinguish a lithium-ion battery fire?

The most effective approach combines sustained cooling, thermal isolation, and measures against reignition. It addresses the thermal runaway cycle rather than only the visible flames. Because the energy driving the fire comes from inside the cells, flame suppression is only the first step. The battery must then be kept cool and monitored, because visible flames going out does not show that it is internally stable.

Hydrogel, developed by Anogas, is a water-based agent containing modified natural clay. It is certified to KIWA NTA 8133 for lithium-ion battery fire applications. Its high water content absorbs heat rapidly. Its viscosity increases on contact with heat, which is intended to keep the agent in contact with hot surfaces instead of running off like water. The clay particles help form a barrier on affected surfaces, restrict oxygen, and interact with hazardous gases such as hydrogen fluoride.

Hydrogel’s effectiveness depends on access. An externally applied agent may not reach cells inside an enclosed pack and cannot be assumed to stop every internal reaction. Performance depends on the battery configuration, enclosure design, agent quantity, and how the agent is delivered. NTA 8133 certification relates to the specific tested scope, not to every battery size or installation.

For immediate intervention, portable Hydrogel extinguishers allow direct application to the fire source. For larger installations, such as energy storage systems, EV charging bays, or industrial battery rooms, Hydrogel-based suppression systems can be integrated with existing water-based infrastructure. Hydrogel is interchangeable with water, but an existing sprinkler system should not be assumed to work with it. Verify nozzle arrangement, coverage, operating temperature, compatibility, and any required approvals through an engineering assessment before making changes.

Post-incident procedure matters as much as the extinguishment itself. After visible flames are out, monitor the battery for signs of renewed instability. A monitoring period of at least 20 minutes is commonly used, but the right duration depends on the battery and the incident. If possible, transfer the battery to a water-filled containment vessel and store it in a well-ventilated area, isolated from combustible materials. A cooling period of 48 hours before disposal is a common precaution, but it is not a universal rule. Gas venting can continue after the fire appears to be out, so restrict access and wear respiratory protection throughout the response.

For facilities that need protection beyond reactive suppression, Anogas also offers a thermal runaway blocker. It is designed to interrupt propagation before a single-cell event escalates into a full pack fire, which is particularly relevant in high-density battery environments where cell-to-cell propagation poses the greatest risk.

Gerelateerde artikelen

Harry Verbakel