Electric vehicles, e-bikes, energy storage systems, and consumer electronics have transformed the way the world stores and uses energy. But the lithium-ion batteries powering this shift carry a fire risk that differs from what conventional fire safety was designed to handle. Lithium-ion battery fires burn hotter, behave less predictably, and are harder to extinguish than many other fire types. Understanding why this risk is growing, and what it takes to control it, is now essential for anyone working in or around fire safety.
Across industries from logistics to maritime to recycling, the question is no longer whether lithium-ion battery fire risk applies, but how prepared the people and systems in place actually are. This article sets out who is most exposed, what makes these fires technically demanding, how regulation is changing, and what Hydrogel can and cannot do compared with conventional agents.
Industries Most Exposed to Lithium-Ion Battery Fire Hazards
Lithium-ion battery fire risk is not confined to a single sector. It follows the technology, and that technology is now embedded across a wide range of industries, each with its own exposure profile.
Warehousing and logistics operations are among the most heavily exposed. E-commerce has placed large numbers of lithium-ion-powered devices, tools, and vehicles inside the same buildings, often alongside high-density racking that can accelerate fire spread. E-bikes and electric forklifts are now standard equipment in many facilities. A single thermal runaway event in a charging area can escalate rapidly.
Energy storage installations present a concentrated risk. Grid-scale battery systems, commercial solar storage, and backup power units contain many cells in close proximity. If one cell enters thermal runaway, its heat can spread to neighbouring cells. A localised incident can then become a large-scale event that overwhelms standard suppression systems.
Maritime operators face a particularly serious challenge. A lithium-ion battery fire in an enclosed hull, far from shore-based emergency services, limits both suppression capability and response time. The growing use of electric propulsion and onboard energy storage is increasing this risk. Any change to marine fire protection must be checked against flag-state requirements, class rules, and equipment approvals.
Recycling facilities that process electronic waste, batteries, and end-of-life vehicles handle damaged and degraded cells that are already prone to thermal instability. Mechanical damage during sorting or compaction can trigger thermal runaway without warning. EV charging infrastructure providers, building managers overseeing car parks with EV access, and industrial plant operators running battery-powered equipment share comparable exposure. The common thread is that the energy density of lithium-ion technology creates a fire hazard that scales with adoption.
What Makes Lithium-Ion Battery Fires Uniquely Difficult to Suppress
The core challenge is that the energy sustaining the incident can come from inside the battery cells, not just from external fuel. Suppressing visible flames therefore does not necessarily end internal heating, gas release, or thermal runaway.
When a lithium-ion cell is mechanically damaged, overcharged, or exposed to excessive heat, it can enter thermal runaway. Internal materials decompose, flammable gases are released, pressure builds, and the casing can rupture. Heat from the failing cell then transfers to adjacent cells, triggering a cascade of failures across the pack. Temperatures during thermal runaway can exceed 850 degrees Celsius.
Hazardous Gas Release
Lithium-ion battery fires release a mixture of dangerous gases, including hydrogen, methane, and hydrogen fluoride. Hydrogen and methane increase flammability and explosion risk. Hydrogen fluoride is toxic and corrosive. Gas release can continue after visible flames have been suppressed, so a fire that appears to be out may still be creating hazardous conditions.
Re-ignition Risk
Re-ignition is one of the most serious operational challenges in battery fire response. Residual heat and ongoing chemical activity inside the battery can restart combustion long after the initial flames are out. Water cools effectively at the surface, but it runs off quickly and does not stay in contact with the heat source, so temperatures can climb again once application stops. Understanding how thermal runaway develops and propagates is the starting point for choosing a suppression approach that addresses the incident rather than only interrupting it.
How Tightening Regulations Are Reshaping Fire Suppression Requirements
Regulatory pressure is accelerating the move away from PFAS (per- and polyfluoroalkyl substances) in firefighting agents. These persistent synthetic chemicals have been widely used in foams because of their performance, but their environmental and health consequences are now driving legislative action across Europe and beyond.
European regulation is phasing out PFAS-containing extinguishing agents. Regulation (EU) 2025/1988 sets a trajectory towards a complete ban by 2031. For fire safety operators, distributors, and facility managers, this creates a practical deadline. Products and systems that rely on PFAS-based agents will need to be replaced, and the window to plan that transition is narrowing.
Requirements for installing and managing lithium-ion battery systems are also becoming stricter. Building codes, insurance requirements, and industry standards increasingly expect suppression systems in high-risk battery environments to address thermal runaway, not just surface flames. Operators should assess which requirements apply to their site and verify that any proposed solution has documented performance against battery-specific fire scenarios.
For distributors in the fire safety sector, this environment brings both a compliance challenge and a market opportunity. Products that are already PFAS-free and tested for lithium-ion battery applications are well placed to meet demand that PFAS-based foams will increasingly be unable to serve.
How Hydrogel Technology Addresses Lithium-Ion Battery Fire Risks
Hydrogel is a water-based agent containing modified natural clay. It is designed to cool the fire and keep the agent in contact with hot surfaces, which addresses two weaknesses of plain water: run-off and loss of contact. Its performance still depends on access to the battery, battery configuration, agent delivery, and the evidence available for the specific scenario.
The key to how Hydrogel works is its heat-responsive viscosity. At ambient temperatures, Hydrogel is a low-viscosity liquid that can be applied through water-based equipment. On contact with heat, it thickens into an adhesive gel that clings to hot surfaces instead of running off. This sustained contact supports continued cooling, whereas water alone loses contact quickly and allows temperatures to rebound.
What Hydrogel Is Designed to Do
Cooling and initial fire suppression are the primary functions. Hydrogel’s high water content absorbs heat and lowers surface temperatures, while the gel layer stays in contact with the fire source. The gel can also act as a barrier on exposed surfaces, which may help limit heat transfer to neighbouring cells and contain the fire within a defined area.
Gas hazard reduction is a secondary effect. The gel layer is intended to restrict oxygen availability at the surface, and it can interact with hydrogen fluoride to convert it into less harmful ionic components. This does not eliminate battery gases, so ventilation, monitoring, and restricted access remain necessary.
Lithium-ion stabilisation is the least straightforward claim. The modified clay is intended to bind reactive lithium ions where the agent reaches damaged battery structures. An externally applied agent will not necessarily reach cells inside an enclosed pack, so it cannot be assumed to stop every internal reaction. Where access is limited, discharge arrangement and battery design determine how much of the pack the agent can influence.
Keeping Product Roles Separate
Hydrogel is intended for cooling and initial fire suppression. Hydrogel Shield is intended for longer-term containment, to help prevent reignition of damaged or extinguished batteries. Hydrogel SubZ is a frost-protected formulation for relevant cold-temperature applications. Select the product that matches the stage of the incident and the operating conditions.
Certification and System Considerations
Hydrogel contains zero PFAS. That is relevant to the regulatory shift described above, but PFAS-free status does not by itself demonstrate environmental harmlessness, firefighting performance, or marine approval. Hydrogel extinguishers have been tested according to KIWA NTA 8133 for lithium-ion battery fire applications. Verify the specific extinguisher model, test scope, and limitations before relying on that result. A portable-extinguisher test is not approval of every battery size, installation, or complete marine system.
Hydrogel is designed to be interchangeable with water, but do not assume an existing sprinkler or water-based system will work with it. Assess access to the battery, enclosure design, agent quantity, nozzle and discharge arrangement, coverage, operating temperature, compatibility, and the approvals required. For handheld capability, portable Hydrogel extinguishers are available, while larger installations can be served through fixed fire suppression systems using the same technology. Any change to mandatory marine fire protection requires engineering and approval checks.
After the Fire
Extinguishment is not the same as safety. After suppression, residual heat and gas release can persist, and re-ignition remains possible. Monitor the battery, restrict access, and handle the damaged unit with care. Do not treat an extinguished battery as safe for reuse, storage, transport, or disposal until it has been assessed.
The Commercial Opportunity for Fire Safety Distributors
For fire safety distributors, rising lithium-ion battery adoption, tightening PFAS regulation, and growing demand for battery-specific suppression create a clearly defined market. The industries most exposed to battery fire risk are looking for products that can demonstrate performance, not just compliance on paper.
Water, dry chemical, CO2, and foam systems each have a role in fire protection, along with their own limitations. Most were not designed with battery thermal runaway in mind, and PFAS-based foams face a regulatory phase-out. A PFAS-free agent with documented performance in lithium-ion battery fire testing therefore fills a real gap, provided its scope and limits are explained accurately.
Distributors who understand technical fire safety products and serve warehousing, maritime, EV infrastructure, or industrial customers can add value by helping them choose the right product for the application. The Hydrogel product range is available in formats for both handheld and fixed-system applications, so one technology platform can serve different customer segments.
The broader trend is clear. As lithium-ion batteries spread across more sectors, demand for suppression solutions engineered for battery fire risks will keep growing. Distributors who build technical expertise and supply capability now are entering a market that is still early in its development, with PFAS phase-out shortening customer transition timelines. In 2026, that combination of product differentiation, environmental compliance, and end-market demand makes this one of the more compelling opportunities in fire safety.
Gerelateerde artikelen
- How does cooling capacity affect fire suppression performance?
- How does a water-based fire suppressant work on electrical fires?
- What extinguishing agent works best on lithium-ion battery fires?
- What PFAS-Free Fire Suppressant Means for Fire Safety at Home
- How Sustainable Fire Suppression Works with Water-Based Hydrogel


