How does a thermoresponsive gel extinguish fires?

A thermoresponsive gel is a water-based agent that thickens when it contacts heat. The thickened gel stays on the hot surface instead of running off. This is intended to improve heat extraction, help suppress flames, and reduce the risk of reignition compared with water alone. The sections below explain the mechanism, how it applies to lithium-ion battery fires, and what to check before using it with existing fire suppression infrastructure.

How does temperature trigger the gel-forming reaction?

When a thermoresponsive gel contacts a hot surface, the rising temperature causes the suspended particles in the fluid to cross-link and swell. The low-viscosity liquid becomes a dense, viscous gel. This transition needs no activator other than heat. The hotter the surface, the faster and more completely the gel structure forms.

Hydrogel is a water-based agent containing modified natural clay particles. At ambient temperature, it flows freely and can be pumped, sprayed, or discharged through suitable nozzle configurations. On reaching a hot fire source, the clay particles thicken the surrounding water. The gel can also expand during application, which improves contact with irregular or porous surfaces and increases the area over which heat is extracted.

This self-regulating behaviour is why thermoresponsive gel can outperform plain water in sustained cooling. Water runs off a hot surface almost immediately and carries away heat in one brief exchange. The gel stays in place and keeps drawing heat from the material beneath for as long as the thermal gradient persists.

Why does gel cling to surfaces better than water?

Thermoresponsive gel adheres to hot surfaces better than water because its viscosity increases under heat, which resists runoff. Water leaves within seconds of contact. The gel can hold on vertical surfaces, curved structures, and accessible cavities, maintaining a cooling layer that water struggles to sustain.

The clay in Hydrogel does two jobs. It gives the gel its adhesive structure, and it acts as a barrier that limits oxygen access to the burning material beneath. This restriction contributes to flame suppression alongside the cooling effect, so the gel works through two mechanisms at once.

The practical implication is that less agent may be needed to achieve the same cooling outcome. Reduced runoff also lowers the volume of contaminated liquid to manage after an incident. The extent of these savings depends on the application and how the agent is delivered.

How does thermoresponsive gel suppress lithium-ion battery fires?

Hydrogel is designed to address lithium-ion battery fires through four mechanisms: sustained cooling, physical isolation of heat, reduction of flammable gases, and chemical stabilisation of reactive lithium components. Conventional agents typically address only some of these, which is one reason lithium-ion battery fires are difficult to control.

Extinguishing visible flames is not the same as stabilising the battery. When a lithium-ion cell overheats, through mechanical damage, overcharging, or a manufacturing defect, it can enter thermal runaway. Rising temperature accelerates chemical reactions that generate more heat. Neighbouring cells can be drawn in, so a fire can continue inside a pack, release gas, or reignite after the flames appear to be out. The thermal runaway blocker function of Hydrogel is designed to interrupt this chain reaction.

See where Hydrogel fits your fire-safety strategy
From lithium-ion batteries to existing water-based suppression systems, speak with Anogas about your application.

Discuss your application

Cooling and physical containment

Hydrogel’s high water content absorbs heat quickly and lowers battery surface temperature. The gel adheres to the battery casing and, where there is access, can reach internal structures to cool affected cells. The resulting thermal barrier is intended to limit heat transfer to adjacent cells and slow propagation through the pack.

Performance depends on access. An externally applied agent may not reach cells inside a sealed or enclosed pack. Battery configuration, enclosure design, agent quantity, and delivery method all affect the outcome, so assess each before relying on the agent.

Gas reduction and chemical stabilisation

Lithium-ion battery fires release hazardous gases, including hydrogen fluoride, flammable hydrocarbons, and methane. Hydrogel can reduce the concentration of flammable gases and restrict oxygen availability. It is also reported to interact with hydrogen fluoride, converting it into less harmful ionic components. The modified clay particles are intended to penetrate damaged battery structures and bind reactive lithium ions, which can reduce the chemical reactivity behind reignition. See how Hydrogel works for the underlying chemistry.

Hydrogel reduces hazardous gas exposure but does not eliminate it. It does not guarantee that reignition cannot occur. Keep a safe distance, use appropriate respiratory protection, and continue to monitor the battery for residual heat and gas release after flames are suppressed. For longer-term containment of damaged or extinguished batteries, Hydrogel Shield is the product intended for that role. Hydrogel handles cooling and initial suppression.

What fire classes can a thermoresponsive gel extinguish?

Hydrogel is rated for Class A, Class B, and Class F fires, covering solid combustibles, flammable liquids, and cooking oils and fats respectively. This makes it suitable for a range of residential, commercial, and industrial environments. Always confirm the rating of the specific extinguisher model against the fire risk it will protect.

Class A covers wood, paper, textiles, and plastics, the most common fire type in buildings and warehouses. Class B covers flammable and combustible liquids, which are relevant in industrial and maritime settings. Class F covers high-temperature cooking-fat fires, which water extinguishers can dangerously worsen by causing violent steam explosions.

Lithium-ion battery fires do not fit neatly into traditional fire-class definitions, and Hydrogel is formulated to address them as well. Where electric vehicles, e-bikes, energy storage systems, and consumer electronics are present, one agent for both conventional and battery fires can simplify operations. Handheld extinguishers using Hydrogel are available for this multi-risk scenario. Test results for a portable extinguisher apply to that model and test scope. They are not approval for every battery size, vessel, or installed system.

Is thermoresponsive gel safe for people and the environment?

Hydrogel is classified as non-dangerous to humans and the environment under European chemical legislation. It contains no intentionally added PFAS, and independent measurement found less than 1 part per billion. Analytical non-detection is not proof of absolute absence. The product is more than 99% naturally derived components: modified natural clay and water. Aquatic toxicity studies conducted to OECD guidelines confirmed non-toxic status for both algae and daphnia.

The PFAS-free formulation is relevant because regulatory pressure on fluorinated extinguishing agents continues to grow across European and North American markets. Some legacy agents, including certain foams, contain per- and polyfluoroalkyl substances that persist in soil and water. PFAS-free status does not by itself establish overall safety, firefighting effectiveness, or marine approval. Those are separate claims, each with its own evidence.

Hydrogel has a service life of more than ten years. At replacement, it can be discharged without special disposal procedures because it is ECO-safe. After its service life, it is expected to be recyclable into a compost-enrichment supplement. The carbon footprint of the product is less than 0.7%, reflecting a low-energy, naturally derived manufacturing process.

Hydrogel itself presents no chemical hazard to people applying it. The risks in a lithium-ion battery fire intervention come from the fire and the gases the battery releases, not from the agent. Safe reuse, storage, transport, and disposal of a damaged battery remain separate questions that the extinguishing agent does not answer.

Can thermoresponsive gel replace water in existing fire suppression systems?

In many cases, yes, but verify first. Hydrogel is designed to be interchangeable with water in water-based fire suppression systems, which removes a common barrier to adopting a new agent: replacing existing infrastructure. Do not assume that an existing sprinkler system works with Hydrogel. Confirm compatibility of pipework, nozzles, pumps, agent quantity, coverage, and operating temperature, and complete any engineering and approval checks required for the installation.

Although it is more than 95% water, Hydrogel can be deployed on energised electrical equipment up to 1,000 V when used with suitable nozzle configurations. This extends its applicability to data centres, EV charging infrastructure, and industrial control panels, where conventional water discharge would create an electrocution risk.

For facilities already operating sprinkler, deluge, or other fixed installations, the conversation can shift from infrastructure replacement to agent substitution, which is a simpler procurement decision. Do not use Hydrogel to replace or modify mandatory fire protection, including marine systems, without engineering and approval checks. Details on compatible fire suppression systems and integration options are available for operators and specifiers evaluating the transition.

Because the gel adheres to surfaces longer than water, the volume of agent needed for effective suppression may be lower. That can reduce both the cost per incident and the contaminated runoff to be managed afterwards. Actual quantities depend on the hazard, the delivery arrangement, and test evidence for the specific setup.

Gerelateerde artikelen

Harry Verbakel