What is the difference between foam and gel fire suppression?

Foam and gel fire suppression agents work through different mechanisms. Foam forms a blanket over burning material to cut off oxygen. Gel adheres to hot surfaces and cools them through sustained thermal contact. The difference matters most for modern fire risks such as lithium-ion battery fires, where cooling depth and the risk of reignition are critical. The sections below answer the questions professionals most often ask when comparing the two approaches.

How do foam and gel fire suppression agents actually work?

Foam generates a layer of bubbles that sits on top of burning material, blocking oxygen from the fuel surface and smothering the fire. Gel works differently. Hydrogel is a water-based agent containing modified natural clay. It thickens when it meets heat, so it stays in contact with hot surfaces instead of flowing away.

Traditional foam is produced by mixing water, a foaming agent and air. The resulting blanket seals fuel surfaces, particularly liquid fuels, against oxygen. Foam is primarily a surface agent, however. It does not penetrate burning material, and it provides little sustained cooling once the foam layer breaks down.

Hydrogel stays low in viscosity at ambient temperatures, so it can flow through standard nozzles and pipework. When it reaches a heat source, its heat-responsive formulation thickens and bonds to the surface. The cooling agent therefore stays where the fire is rather than running off. How Hydrogel works explains this mechanism in more detail.

Which fire types does each suppression agent handle best?

Foam is best suited to Class B fires involving flammable liquids, where its oxygen-smothering blanket is highly effective. Gel agents are used across a broader range of fire classes, including Class A solid-material fires, Class F cooking-fat fires and lithium-ion battery fires. In these applications, sustained cooling and reignition control matter more than surface blanketing. Suitability still depends on the specific agent, its test evidence and the application.

Foam forms a stable seal over liquid fuel surfaces. For fuel tank fires, solvent spills and similar liquid-fuel scenarios, a well-applied blanket can suppress the fire quickly and hold the surface against reignition while the layer stays intact.

Gel agents cover a wider range because their cooling does not depend on surface sealing alone. On Class A materials such as wood, textiles or plastics, the gel can reach porous surfaces and remove heat. On cooking fats, the gel can float on the fuel surface while cooling it below ignition temperature. For lithium-ion batteries, cooling and surface adhesion give gel agents clear advantages over foam, as discussed below.

See where Hydrogel fits your fire-safety strategy
From lithium-ion batteries to existing water-based suppression systems, speak with Anogas about your application.

Discuss your application

Why is foam fire suppression being phased out in many markets?

Many high-performance foams contain PFAS (per- and polyfluoroalkyl substances), which are persistent environmental contaminants. Regulators in Europe, North America and other regions are restricting or banning PFAS-containing agents, so industries are looking for alternatives.

Aqueous film-forming foam (AFFF) has been widely used in aviation, military and industrial settings. It relies on fluorosurfactants for rapid surface sealing. These fluorinated compounds do not break down naturally. They have been linked to contamination of soil, groundwater and drinking water near sites where foam has been used or stored.

The European Union’s REACH regulation and national legislation in several member states have progressively tightened PFAS restrictions, including provisions aimed at firefighting foams. Similar regulatory movements are under way in North America and Australia. For distributors and end users, the compliance risk extends beyond new purchases to the management and disposal of existing foam stocks.

PFAS-free alternatives, including gel-based agents, are gaining market share as a result. A PFAS-free fire extinguisher built on gel technology avoids the regulatory and environmental liability of fluorinated foam. PFAS-free status does not by itself show that an agent performs well on a given fire class, so verify performance evidence separately.

What makes Hydrogel different from traditional water-based agents?

Water cools effectively but runs off quickly once applied. Hydrogel contains modified natural clay that makes it thicken under heat. This keeps it in contact with hot surfaces for longer than water alone and helps maintain cooling after the initial suppression phase.

Water flows away from the heat source under gravity. On vertical surfaces, sloped structures or battery packs, it makes brief contact and drains before transferring its full cooling capacity. More water is then needed for the same result, and the risk of reignition remains higher once application stops.

Hydrogel combines the thermal capacity of water with a clay-based structure that responds to temperature. As the gel heats up, it becomes more viscous and grips the surface. This is intended to maintain a cooling layer through the period after visible flames are out, when residual heat and ongoing reactions inside a battery can still cause reignition.

Hydrogel is also designed to interact with some of the hazardous species released during battery thermal runaway, such as hydrogen fluoride. Plain water has no equivalent function. How much of this effect is achieved depends on whether the agent can reach the affected cells. The full mechanism is described on the thermal runaway blocker page.

Can gel fire suppression agents be used in existing foam systems?

Often, but not automatically. Gel agents formulated as water-based fluids are designed to work with water-based firefighting equipment such as sprinkler systems, deluge systems and handheld extinguishers. In many installations they do not require new pipework, pumps or nozzle configurations. Confirm compatibility for each installation, because existing systems vary.

This is a practical advantage for facilities moving away from foam without a full infrastructure overhaul. A gel agent can replace water or foam in the same delivery system, provided the system is flushed and the agent’s viscosity characteristics fall within the design parameters.

Hydrogel can be used in standard water-based fire suppression systems and in handheld fire extinguishers. Its low ambient viscosity lets it flow through standard nozzles, and it thickens only once it reaches the heat source. Before changing any system, assess the nozzle arrangement, coverage, operating temperature and agent quantity. Where the system is a mandatory installation, such as marine fire protection, engineering review and the relevant approvals must come first.

Do not mix gel agents with foam concentrates in the same system without proper flushing, because residual foam may affect gel performance. A clean changeover does not require specialist equipment.

Which suppression agent is better for lithium-ion battery fires?

Gel agents are generally better suited than foam to lithium-ion battery fires. Foam works by cutting off surface oxygen, but thermal runaway is driven by internal reactions inside the cell, so a surface blanket does not stop it. Gel agents are designed to cool the battery, maintain that cooling after flames are out and reduce the risk of reignition.

Lithium-ion battery fires differ from conventional fires. When a cell enters thermal runaway, internal materials decompose and release flammable gases, including hydrogen and methane, as well as toxic and corrosive hydrogen fluoride. The energy sustaining the fire comes from inside the battery, not from external fuel. Suppressing the visible flames does not show that the battery is stable. Internal heating, gas release and reignition can continue.

Effective suppression therefore needs several things at once: rapid temperature reduction, sustained cooling to limit reignition, thermal isolation to stop heat spreading to neighbouring cells, and management of the hazardous gases released. Hydrogel is designed to support these functions in a single agent: cooling, thermal isolation, gas suppression and neutralisation, lithium-ion stabilisation through clay particle interaction, and reignition control through sustained thermal management.

Performance depends on whether the agent can reach the heat source. An externally applied agent may not reach cells inside an enclosed pack, so assess the battery configuration, enclosure design, agent quantity and discharge arrangement. Quantities range from a few litres for small devices such as smartphones and laptops to very large volumes for industrial battery installations. Treat any example figure as application-specific.

After the fire, continue to monitor for residual heat and gas hazards, restrict access and handle the battery with care. Extinguishment does not mean the battery is safe to reuse, store, transport or dispose of. Foam provides no chemical stabilisation and little sustained cooling for these incidents, so it is poorly matched to one of the fastest-growing fire risks in warehousing, logistics, maritime and industrial sectors in 2026.

Gerelateerde artikelen

Harry Verbakel