Hydrogel is designed for electric vehicle fires because it is a water-based agent containing modified natural clay. Its viscosity rises as temperatures increase, which is intended to keep the agent in contact with hot battery surfaces, extract heat and suppress flames. It contains no PFAS. Unlike water alone, Hydrogel thickens on hot surfaces, so cooling stays focused where thermal energy is most dangerous. How far it reaches inside a battery pack depends on access, battery configuration and agent delivery. The sections below cover the mechanism, the safety considerations and the practical applications.
How does hydrogel suppress lithium-ion battery fires?
Suppressing visible flames and stabilising a battery are different tasks. Hydrogel is designed to address both: it suppresses flames, removes heat from the cells, and can help slow thermal propagation to neighbouring cells. In practice, results depend on whether the agent can reach the affected cells. Hydrogel does not guarantee that every internal reaction stops.
The mechanism is heat-responsive viscosity. At ambient temperatures, Hydrogel behaves as a low-viscosity, water-based fluid that flows easily and penetrates tight spaces. On contact with hot battery surfaces, it thickens into a viscous gel that adheres rather than running off. This matters for lithium-ion battery incidents, where heat builds up inside dense cell structures and must be removed continuously, not just in the first seconds of application.
Because Hydrogel stays on hot surfaces longer than water alone, it keeps cooling after visible flames have gone. This post-suppression cooling can help reduce the risk of reignition in neighbouring cells. It does not remove that risk. Some industry guidance suggests an observation period of at least 20 minutes after extinguishment, followed by transfer of the battery to a containment vessel, isolated from combustible materials, for 48 hours or more before disposal. These figures are examples only. The right monitoring period depends on the battery, the incident and the guidance in force. Sustained cooling can support monitoring by keeping surface temperatures lower, but it does not make the battery safe to reuse, store, transport or dispose of.
The clay in Hydrogel also forms a physical barrier on the surface, which can limit oxygen supply and heat exchange. This combination of cooling and surface insulation is why Hydrogel’s fire suppression mechanism is best understood as fire control and stabilisation rather than simple extinguishment. For longer-term containment of damaged or extinguished batteries, Hydrogel Shield is the separate product intended to help prevent reignition.
Why are electric vehicle fires harder to extinguish than conventional car fires?
Electric vehicle fires are harder to extinguish because lithium-ion battery packs can keep heating internally and reignite after the flames appear to be out. The underlying process, thermal runaway, generates its own heat and flammable gases inside the pack. Suppressing visible flames does not remove this source. Agents that work well on fuel or upholstery fires are not designed to interrupt the internal chain reaction.
Thermal runaway occurs when a failing cell generates more heat than it can dissipate. That heat can trigger the neighbouring cell, which triggers the next, and the reaction can cascade through the pack. The process releases toxic and flammable gases, including hydrogen fluoride, and reignition can occur hours after the incident appears resolved. This is why EV fires demand so many resources from emergency responders.
The structure of the pack makes this harder. Cells are densely packed and often enclosed in protective housings that limit how far an extinguishing agent can penetrate. Water applied externally may cool the surface while internal temperatures continue to rise. Reaching the thermal source requires either large volumes of water applied over a long period, or an agent that stays in contact with hot surfaces long enough to extract heat. Even then, access to the pack remains the deciding factor.
Understanding how thermal runaway develops and spreads is essential when evaluating any battery fire suppression solution. An agent that cools only the outside of a pack leaves the core hazard unresolved.
What makes hydrogel safer for people and the environment during EV fires?
Hydrogel is formulated to be safer for people and the environment during EV fires. It is PFAS-free, is classified as non-dangerous for humans and the environment under European chemical legislation, and consists of more than 99% natural components, primarily modified natural clay and water. Used Hydrogel can be collected and recycled, and its clay-based components may be reusable as compost-enrichment material.
PFAS (per- and polyfluoroalkyl substances) have historically been used in foam-based fire suppressants because they coat surfaces and smother flames. They persist in the environment and in human tissue, and regulatory pressure to phase them out is growing across Europe and beyond. An EV fire already releases toxic gases from the battery. A PFAS-containing agent adds a second contamination risk to an already hazardous incident.
Hydrogel avoids that secondary risk. PFAS analysis found none above detection limits, which is evidence of non-detection rather than proof of absolute absence. Aquatic toxicity studies conducted to OECD guidelines found it non-toxic to aquatic organisms. Its carbon footprint is less than 0.7%, and after a service life of more than ten years the material is expected to be recyclable rather than destined for hazardous waste streams. These points describe composition and environmental profile. They do not, on their own, demonstrate firefighting performance or marine approval. For responders, the absence of PFAS also reduces one source of personal exposure, though the gases and residues from the battery itself remain.
After an incident, residual Hydrogel can be removed by absorbing excess material and rinsing affected surfaces with water. This is a straightforward cleanup. Battery debris, contaminated runoff and the restricted-access period after a fire still need to be managed separately.
How does hydrogel compare to water when fighting EV battery fires?
Water is the most widely available agent and does cool battery fires effectively when it can be applied in sufficient volume. Hydrogel differs because it adheres to hot surfaces and stays in contact longer than water, which runs off quickly. Longer contact means more heat extracted per volume of agent applied. It can also reduce the total volume needed and the contaminated runoff produced, which matters in enclosed spaces such as parking structures and warehouses.
Hydrogel is interchangeable with water in water-based fire suppression systems. That does not mean an existing sprinkler system will automatically work with Hydrogel. Before any change, assess access to the battery, enclosure design, agent quantity, nozzle and discharge arrangement, coverage, operating temperature and compatibility. Any change also needs engineering and approval checks. Despite being over 95% water by composition, Hydrogel can be used on electrical equipment up to 1,000 V when applied with suitable nozzle configurations. Confirm the conditions for your application first.
The operational difference is efficiency. Water has low viscosity and flows away from vertical and hot surfaces almost immediately. In a battery fire, this means continuous application is needed to maintain any cooling effect, which consumes large volumes and generates runoff carrying electrolyte residue and other contaminants. Hydrogel’s gel-forming behaviour can reduce the volume needed and limit the runoff.
Other agents have a role too. Dry chemical, CO2 and foam can suppress flames in some scenarios, but they generally offer limited or no sustained cooling of battery cells. When comparing options for a next-generation battery fire fighting agent, compare cooling capacity, agent consumption, post-incident cleanup and the approvals your site requires.
Where is hydrogel already being used for EV and battery fire protection?
Hydrogel is used for lithium-ion battery fire protection in settings where battery risk is concentrated, including warehousing and logistics facilities, recycling operations, maritime environments and building fire protection systems. It is available in handheld fire extinguishers and in integrated suppression systems, from portable first-response use to fixed installations.
The growth of electric vehicles, e-bikes, energy storage systems and portable electronics has created battery fire risk in sectors that previously had little exposure to it. Warehouses storing or charging EV fleets, recycling facilities processing lithium-ion battery waste, and buildings with EV charging infrastructure are among the environments where conventional suppression approaches are being re-evaluated.
In the maritime sector, a fire at sea carries severe consequences, and the question is often agent effectiveness rather than water availability. Hydrogel’s cooling performance and environmental profile make it a relevant option. Maritime use still depends on the specific installation. A passed portable-extinguisher test, such as EN 3-11 or NTA 8133, covers a specific extinguisher model within a defined scope. It is not approval of a complete marine battery installation, and it does not replace flag-state requirements, class rules or marine equipment approvals. Verify the certification status of the exact product and the approvals your vessel requires. Recycling facilities face a different challenge: battery fires in mixed waste can spread quickly and involve several fire classes at once. Hydrogel’s suitability for Class A, B and F fires, in addition to lithium-ion battery incidents, is useful there.
For portable protection, handheld extinguishers using Hydrogel technology are available under the ASAPs brand, the only fully circular fire extinguishers currently on the market. For fixed protection, Hydrogel-based suppression systems can be integrated into existing water-based infrastructure. Any such change should be assessed and approved before it is made, and mandatory fire protection must not be replaced without those checks. For cold-temperature applications, Hydrogel SubZ is the frost-protected formulation.
Gerelateerde artikelen
- How do maritime operators comply with lithium fire safety standards in 2026?
- What causes re-ignition in battery fires and how do you prevent it?
- Can a single extinguishing agent cover Class A, B, and F fires?
- How do you stop thermal runaway from spreading?
- Why Hydrogel Is Safer Than Traditional Fire Suppressants


