How Hydrogel Helps Prevent Fire Spread in Warehouses

Hydrogel is a water-based agent containing modified natural clay. It is designed to form a heat-responsive gel layer that stays in contact with hot surfaces, cools them and helps suppress flames. Unlike water, which runs off quickly, Hydrogel is intended to keep cooling after visible flames are out, which can help interrupt heat transfer and reduce the risk of reignition. How well it performs depends on access to the heat source, the battery configuration and how the agent is delivered. The sections below answer the questions warehouse operators and fire safety professionals ask most often.

How does fire spread so quickly in warehouse environments?

Fire spreads quickly in warehouses because of high fuel loads, open floor plans and limited compartmentalisation. Racking, packaging and stored goods create continuous fuel paths, so flames can travel horizontally and vertically with little resistance. Poor control of air circulation and the presence of energy storage equipment, particularly lithium-ion battery systems, can speed this up further.

Lithium-ion batteries present a specific and serious risk. When a cell overheats and enters thermal runaway, it releases flammable and toxic gases and generates intense heat. That heat transfers to neighbouring cells and can trigger a chain reaction that conventional suppression systems may struggle to interrupt. E-bikes, power tools, forklifts and energy storage units are often charged or stored close together in warehouses, so this propagation risk is significant and growing.

Warehouse layout adds to the problem. High ceilings can delay sprinkler activation, and densely packed racking concentrates heat. By the time a system responds, fire may already have spread across several bays.

See where Hydrogel fits your fire-safety strategy
From lithium-ion batteries to existing water-based suppression systems, speak with Anogas about your application.

Discuss your application

How does hydrogel stop fire from spreading across a warehouse?

Hydrogel is designed to limit fire spread by forming a viscous, adhesive gel layer on hot surfaces. The layer cools the heat source, helps suppress flames and insulates surrounding materials. Its viscosity rises as temperatures increase, which is intended to keep the agent in contact with hot surfaces where it is needed most.

This matters because water tends to run off vertical surfaces or evaporate quickly under extreme heat. A gel layer that adheres can maintain cooling for longer. That is useful in warehouses, where fire can travel up racking or spread across battery packs stored at different heights.

The mechanism works in several ways at once:

  • Flame suppression: The clay content forms a barrier that restricts oxygen access to the fuel.
  • Heat removal: The high water content extracts heat from the fire source and surrounding surfaces.
  • Gas reduction: Hydrogel can reduce the concentration of flammable and toxic gases released during a lithium-ion battery incident, but it does not eliminate them.
  • Reignition risk: Because Hydrogel keeps cooling after visible flames are out, it can help reduce the risk of the fire restarting. It does not guarantee that reignition will not occur.

In large installations, Hydrogel can be applied from a safer distance to suppress and contain a fire until emergency services arrive. This gives operators a practical option for early intervention without direct access to the ignition source.

Why is hydrogel more effective than water for lithium-ion battery fires in warehouses?

Hydrogel can be more effective than water on lithium-ion battery fires because it stays in contact with the battery surface for longer. Water often evaporates or runs off before enough cooling is achieved. Suppressing visible flames is not the same as stabilising the battery. Internal heating, gas release and thermal runaway can continue after the flames are out, so a battery that appears extinguished can reignite minutes or even hours later.

Hydrogel’s heat-responsive gel adheres to external battery surfaces and helps extract heat from them. Its reach has limits. An externally applied agent may not reach cells inside an enclosed pack, so results depend on access to the battery, pack design, agent quantity and how the agent is delivered. Test evidence should be matched to the actual battery configuration.

For example, in Anogas’s application guidance, medium battery systems such as e-bikes and power tools start at a minimum of 6 litres, and smaller devices such as smartphones and laptops at a minimum of 2 litres. Larger industrial installations require significantly more. Treat these figures as application-specific starting points, not universal rules. Because Hydrogel stays attached longer than water, less agent may be needed to achieve stabilisation, which can reduce the volume of contaminated runoff entering drainage systems.

Post-incident monitoring remains essential. A minimum observation period of 20 minutes after extinguishment is recommended to detect renewed instability, and batteries should be isolated for at least 48 hours before disposal. Both are conservative guidance for a typical response, so assess the actual battery type, damage and conditions before setting your own procedure. Extinguishment should never be equated with safe reuse, storage, transport or disposal.

What types of fires can hydrogel extinguish in a warehouse setting?

In a warehouse, Hydrogel is suitable for Class A fires (solid combustibles such as wood, paper and packaging), Class B fires (flammable liquids), Class F fires (cooking oils and fats) and lithium-ion battery fires. This breadth suits the mixed fire risks typical of modern warehousing and logistics.

Warehouses rarely face just one type of fire risk. A distribution centre, for example, may store packaged goods alongside charging stations for electric forklifts, which creates simultaneous exposure to Class A combustibles and lithium-ion battery hazards. One agent covering both can simplify procurement, training and emergency response planning.

Hydrogel is also applicable to electronic waste and industrial waste streams, which is relevant for warehouses handling returned goods, end-of-life equipment or recycling operations. Its performance across fire classes rests on two mechanisms: the water content cools and suppresses flames, while the clay content creates a physical oxygen barrier.

For operators reviewing their fire safety coverage, Hydrogel’s multi-class capability means one product can address storage areas, charging zones and loading bays. Confirm that the tested scope of any specific extinguisher or system matches the risk you are protecting.

See where Hydrogel fits your fire-safety strategy
From lithium-ion batteries to existing water-based suppression systems, speak with Anogas about your application.

Discuss your application

Is hydrogel safe to use in enclosed warehouse spaces?

Hydrogel is suitable for use in enclosed warehouse spaces, subject to standard operator precautions. It contains no PFAS, is classified as non-dangerous for humans and the environment under the most stringent European chemical regulations, and consists of more than 99% natural components. PFAS-free status is a composition point. It does not by itself prove firefighting performance or approval for a specific installation.

Operator safety during application still requires care. Lithium-ion battery fires release flammable, toxic and corrosive gases even after visible flames are suppressed. Hydrogel reduces the concentration of these gases but does not eliminate them. Personnel working in enclosed spaces should keep a safe distance and use appropriate respiratory protection. This is standard fire safety practice and is not specific to Hydrogel.

On environmental and occupational health, Hydrogel’s aquatic toxicity has been tested according to OECD guidelines, which confirmed it is non-toxic for the environment. After use, residual Hydrogel can be removed by absorbing excess material and rinsing surfaces with water. Used Hydrogel can also be collected and recycled, and its natural clay-based components may be suitable for reuse as compost enhancers. This is relevant for warehouses operating under environmental compliance requirements.

Hydrogel is also rated for use on electrical equipment up to 1,000 V when applied with suitable nozzle configurations. This is relevant for warehouses with active charging infrastructure or powered racking systems. Verify the nozzle arrangement and operating limits for your own installation.

Can hydrogel be integrated into existing warehouse fire suppression systems?

Hydrogel is designed to be interchangeable with water and compatible with water-based fire suppression systems, so integration may not require replacing existing infrastructure. Do not assume an existing sprinkler system will work with Hydrogel automatically. Before changing any installed system, confirm compatibility with an engineering assessment covering agent quantity, nozzle and discharge arrangement, coverage, operating temperature and any required approvals. Hydrogel should not replace mandatory fire protection without these checks.

For warehouses already equipped with sprinklers, wet risers or other water-based suppression, Hydrogel can potentially replace water without new pipework, once the assessment is complete. Its low viscosity at ambient temperatures allows it to flow through standard system components, and its gel-forming behaviour is designed to activate as temperatures rise, when suppression performance matters most.

Handheld options are also available. Portable Hydrogel extinguishers give warehouse staff an immediate first-response tool for early-stage fires. They complement fixed suppression systems rather than replacing them. For a more comprehensive approach, fixed Hydrogel suppression systems can be specified for the areas with the highest lithium-ion battery fire risk, such as EV charging bays or battery storage rooms.

Because less Hydrogel may be needed than water to achieve effective suppression, integration can also reduce the volume of agent discharged in an incident. That lowers the amount of contaminated runoff to manage afterwards, a practical benefit for operators working within environmental compliance frameworks. Hydrogel has a service life of more than 10 years and an ECO-safe disposal profile, which makes it a low-maintenance addition to a warehouse fire safety strategy, alongside the other measures a complete response requires.

Gerelateerde artikelen

Harry Verbakel