Hydrogel is a water-based fire suppressant containing modified natural clay. It contains no PFAS, is classified as non-dangerous for humans and the environment under European chemical legislation, and leaves no persistent fluorinated residue in soil or waterways. That is a safety advantage over many foam agents and dry chemical powders, though no single agent is the right choice for every fire. The sections below address what makes conventional suppressants hazardous, why the industry is moving away from PFAS, and how Hydrogel performs in different fire scenarios.
What makes a fire suppressant dangerous to humans and the environment?
A fire suppressant becomes dangerous when its chemical components persist in the environment, accumulate in living organisms, or release toxic byproducts during or after use. The most common hazards come from synthetic fluorinated compounds, heavy metal residues, and reactive chemical agents that remain active long after a fire is extinguished. These substances can contaminate groundwater, harm aquatic life, and expose firefighters and bystanders to health risks.
Foam suppressants formulated with fluorinated surfactants are designed to spread rapidly across a fuel surface and resist breakdown. That stability makes them effective on flammable liquid fires, but it also makes them a problem over time. When these agents run off into drainage systems or soak into soil, they do not degrade. They accumulate.
Dry chemical agents carry a different risk. They can interrupt combustion effectively, but many formulations irritate the respiratory tract and reduce visibility and air quality during application. In enclosed spaces such as warehouses or vehicle tunnels, this creates secondary hazards for anyone present during or after suppression.
Water is generally safe and remains a highly effective coolant. Its limits appear in specific scenarios. On energised equipment or lithium-ion batteries, large volumes of runoff can spread contamination, and cooling must be sustained rather than momentary. The question is what can improve on water for these cases without introducing new hazards, and that is what drives interest in eco-friendly fire suppression solutions like Hydrogel.
Why are PFAS-based suppressants being phased out across industries?
PFAS-based suppressants are being phased out because the fluorinated compounds they contain do not break down in nature, accumulate in human and animal tissue, and are linked to serious long-term health effects, including immune disruption and certain cancers. Regulators in Europe, North America, and elsewhere have introduced progressively stricter limits on PFAS in firefighting agents, and many jurisdictions are moving toward outright bans.
PFAS (per- and polyfluoroalkyl substances) were widely used in aqueous film-forming foams because they suppress flammable liquid fires so effectively. Their persistence is also what makes them hazardous. Once released, they migrate into groundwater, accumulate in fish and wildlife, and eventually enter the human food chain.
For industries that operate near water sources, food production facilities, or densely populated areas, the liability of PFAS use has become significant. Fire training facilities, airports, and industrial sites that used PFAS-based foams for years now face remediation costs that can run into the tens of millions. The pressure to switch is therefore financial as well as regulatory.
Distributors and end users looking for a PFAS-free fire extinguisher need to confirm that the alternative performs adequately for the specific fire risk. Suppression performance, environmental profile, and approvals are separate questions and should be assessed separately. Hydrogel contains no PFAS. Analytical testing found less than 1 part per billion in the product. That result shows PFAS are below the detection limit of the method, which is not the same as proof of absolute absence, and it does not by itself establish firefighting performance or approval for a given application.
How does Hydrogel suppress fires differently from water or foam?
Hydrogel is designed to stay in contact with hot surfaces for longer than water. It is a water-based agent containing modified natural clay, and its viscosity increases when it meets heat. The resulting gel layer adheres to the surface, extends the cooling effect, and helps restrict oxygen at the point of application. Unlike foam, it does not rely on fluorinated chemistry. Unlike water, it is less prone to running off.
Water is an excellent coolant, but its low viscosity means it drains quickly from vertical and angled surfaces, which shortens contact time with the heat source. Foam agents improve surface coverage but typically depend on film-forming chemistry, often fluorinated, to maintain their barrier.
At ambient temperatures Hydrogel flows like water, so it is compatible with standard nozzles and delivery systems. On a hot surface it thickens and adheres, forming a cooling layer that keeps drawing heat away after application has stopped. Longer contact can reduce the volume of agent needed, but the effect depends on how the agent is delivered and what it can reach.
The gel layer also physically restricts oxygen at the combustion zone. In lithium-ion battery fires, performance depends on access to the cells, battery configuration, and how the agent is delivered. You can explore the mechanism in more detail at how Hydrogel works.
Is Hydrogel safe for lithium-ion battery fires specifically?
Hydrogel is designed for lithium-ion battery fires, but it should be assessed against the specific battery and setup. It cools cells, forms a thermal barrier that can slow heat transfer to neighbouring cells, and can reduce some hazardous gas concentrations. Suppressing visible flames is not the same as stabilising a battery, because internal heating, gas release, and thermal runaway can continue after the flames are out. Hydrogel is intended for cooling and initial suppression. Longer-term containment, aimed at helping prevent reignition of damaged or extinguished batteries, is the role of Hydrogel Shield.
Lithium-ion battery fires combine several hazards: intense heat, flammable and toxic gas release, and thermal propagation, where heat from one failing cell triggers cascading failure across a pack. Extinguishing visible flames does not necessarily end the internal reactions that drive reignition. Whether an externally applied agent reaches those reactions depends on how accessible the cells are, how the pack and enclosure are built, and how the agent is delivered.
Gas suppression and toxicity reduction
During thermal runaway, lithium-ion batteries can release hydrogen, methane, and hydrogen fluoride, a corrosive and acutely toxic gas. Hydrogel interacts with hydrogen fluoride and converts it into less harmful ionic components, which can reduce the atmospheric hazard during and after suppression. It reduces hazardous gas concentrations but does not eliminate them. Operators should keep a safe distance and use appropriate respiratory protection throughout any intervention.
Chemical stabilisation and reignition risk
The modified clay in Hydrogel is intended to interact with reactive lithium ions where the agent can reach damaged battery structures. This may contribute to lower reignition risk, but it does not guarantee that reignition will not occur, and it cannot be assumed to reach cells inside an enclosed pack. Hydrogel works best as one part of a wider response that combines sustained cooling, thermal insulation, monitoring, and, where appropriate, containment. For battery storage applications, the thermal runaway blocker configuration applies these principles to larger installations. Before specifying any configuration, assess battery access, enclosure design, agent quantity, and discharge arrangement.
Can Hydrogel be used in existing fire suppression infrastructure?
Hydrogel is designed to be interchangeable with water in water-based fire suppression systems. At ambient temperatures it flows through standard nozzles and delivery systems, and its heat-responsive viscosity activates only on contact with heat. Even so, an existing sprinkler or fixed system should not be assumed to work with Hydrogel. Before switching, assess the complete setup: access to the hazard, enclosure design, agent quantity, nozzle and discharge arrangement, coverage, operating temperature, material compatibility, and any required approvals.
For facilities that already operate sprinkler systems, hose reels, or fixed installations, this compatibility is a practical advantage, because it may avoid new pipework or pump configurations. Confirm this with an engineering review for the specific system. Where a system forms part of mandatory fire protection, such as on board a vessel, do not modify or replace it without engineering and approval checks.
For handheld use, Hydrogel is available in portable extinguisher formats. Its adhesion to surfaces means less agent may be needed than with water alone, which can also mean less contaminated runoff in settings near drainage systems or water-sensitive areas. Treat any capacity comparison as application-specific.
Hydrogel has been tested for use on electrical equipment up to 1,000 V when applied with suitable nozzle configurations. Verify the test scope and conditions before relying on this for a particular installation. Whether the application is a portable extinguisher or a larger fixed system, check the test evidence and approvals for that specific model and use case. A portable-extinguisher test does not approve a complete installed system.
What happens to Hydrogel after it is used or reaches end of life?
After use, Hydrogel can be removed by absorbing excess material and rinsing affected surfaces with water. Used Hydrogel can be collected and recycled, and its natural clay-based components may be suitable for reuse as compost enhancers. Check local waste regulations and the condition of the material, because anything contaminated by the fire itself, such as battery residue, must be handled according to the hazards it contains.
This end-of-life profile differs from PFAS-containing agents, which require specialist disposal and carry contamination risk throughout their handling chain. Hydrogel is classified as non-dangerous for humans and the environment under European chemical legislation, so the agent itself does not fall under hazardous waste protocols. That classification applies to the product, not to debris, battery material, or runoff contaminated during a fire.
Hydrogel has a rated service life of more than ten years, so it does not need early replacement for performance reasons. When replacement is needed sooner, for example after a discharge, the uncontaminated agent can be disposed of without environmental concern.
Extinguishment is not the end of the incident. After a lithium-ion battery fire, residual heat, gas release, and reignition remain possible. Treat the area as restricted and monitor it. As an example, Anogas recommends an observation period of at least 20 minutes after extinguishment, followed by at least 48 hours of cooling before affected battery units are disposed of. These are application-specific figures, and the right periods depend on the battery type, size, and condition and on the guidance of the relevant authorities. Do not treat extinguishment as confirmation that a battery is safe to reuse, store, transport, or dispose of.
When evaluating the full lifecycle of a fire suppression agent, from deployment to disposal and compliance, assess composition, recyclability, test evidence, and approvals as separate questions. More detail on the range of fire suppression systems compatible with Hydrogel is available for those assessing integration at facility level.


