Why Lithium-Ion Battery Fires Are a Growing Safety Risk

Lithium-ion battery fires are a growing safety risk because of thermal runaway, a self-sustaining internal reaction that conventional suppression agents can struggle to stop. Unlike ordinary fires, the energy driving a lithium-ion battery fire comes from inside the cells themselves, so flames can reignite even after they appear to be out. The sections below explain why these fires are increasing, which environments carry the highest risk, and which suppression approaches suit this hazard.

What makes lithium-ion battery fires so difficult to extinguish?

Lithium-ion battery fires are difficult to extinguish because the fire is driven by an internal chain reaction, thermal runaway, that generates its own heat and flammable gas. Cooling the visible flames does not necessarily stop the reaction inside the cells, so reignition remains a risk even after a fire appears to be under control.

When a lithium-ion cell is damaged, overcharged, or overheated, its internal materials begin to break down. Temperature rises rapidly and flammable and toxic gases, including hydrogen, methane, and hydrogen fluoride, are released. Pressure builds until the cell casing ruptures. Heat from one failing cell then transfers to neighbouring cells, which can trigger a cascade of failures across the battery pack. In severe incidents, temperatures can exceed 800°C.

The gas release is a serious complication. Hydrogen and methane increase the risk of explosion, while hydrogen fluoride is toxic and corrosive. Gas emissions can continue after visible flames have gone, so a battery that looks stable may still be hazardous. Responders should keep monitoring affected packs after suppression. The length of the monitoring period depends on the battery, the incident, and local procedures, and a figure such as 20 minutes should be treated as a minimum for a specific scenario, not a universal rule.

Conventional agents such as water, standard foam, and dry powder act on the visible fire. They generally cannot reach cells inside an enclosed pack to interrupt the internal reaction. Water alone can run off hot surfaces quickly and may not stay in contact long enough to bring the pack to a safe temperature. This is why thermal runaway blocking has become a distinct engineering challenge in battery fire safety. It calls for suppression technology and a response plan designed for this type of incident.

See where Hydrogel fits your fire-safety strategy
From lithium-ion batteries to existing water-based suppression systems, speak with Anogas about your application.

Discuss your application

Why are lithium-ion battery fires increasing in frequency?

Lithium-ion battery fires are increasing because the number of lithium-ion cells in daily use is growing rapidly. Electric vehicles, e-bikes, energy storage systems, power tools, and consumer electronics have all expanded the volume of batteries in homes, workplaces, warehouses, and public spaces. More batteries means more opportunities for failure.

The growth is not evenly spread across product categories. E-bikes and e-scooters have drawn particular attention from fire safety authorities. They are often charged indoors, sometimes with aftermarket chargers that do not match the battery’s specifications. Improper charging is one of the most common triggers for thermal runaway. Confined indoor storage makes fire spread faster and evacuation harder.

Energy storage systems present a different scale of risk. As solar installations and grid-scale storage expand, large battery banks are being installed in buildings and industrial facilities that were not designed with battery fire risk in mind. A single thermal runaway event in a large array can escalate quickly because of cascading cell failure.

Regulation is also changing the landscape. European legislation is phasing out fire-fighting foams that contain PFAS (per- and polyfluoroalkyl substances), with a complete ban expected by 2031. Fire safety professionals therefore need to evaluate alternative suppression technologies while battery fire incidents are rising.

Which industries and environments face the highest battery fire risk?

The highest-risk environments are those where large numbers of batteries are stored, charged, or processed close together. These include warehousing and logistics, electric vehicle infrastructure, recycling facilities, maritime operations, and residential buildings with e-bike or home energy storage installations.

Warehousing and logistics operations are a significant concern as more battery-powered devices move through supply chains. A single pallet of lithium-ion products is a concentrated fire load. The large open floor areas of warehouses can allow fire to spread before suppression systems activate.

Recycling facilities face a specific and often underappreciated hazard. Batteries in the waste stream are often damaged, partially discharged, or wrongly sorted. Shredding or compacting can pierce cells and trigger thermal runaway immediately. Unpredictable incoming waste makes ignition events difficult to anticipate.

The maritime sector operates under particularly challenging conditions. On a vessel, fire-fighting resources are limited, evacuation options are restricted, and an uncontrolled battery fire at sea can have severe consequences. As electric propulsion and large battery banks become more common on ships and ferries, fire safety planning must account for how lithium-ion battery fires behave. Any change to marine fire protection also requires engineering assessment and the relevant approvals.

Residential environments are increasingly at risk. E-bikes and e-scooters stored and charged in apartments or garages are a genuine hazard, especially in multi-occupancy buildings where fire can spread from one unit to others. High energy density, indoor charging, and limited fire-fighting equipment make these scenarios dangerous for occupants.

What’s the difference between a lithium-ion fire and a standard fire?

The key difference is that a lithium-ion battery fire is self-fuelling from within the battery. A standard fire relies on an external fuel source and can be extinguished by removing heat, fuel, or oxygen. A lithium-ion battery fire generates its own heat and flammable gases through internal decomposition. Removing external fuel or oxygen alone is therefore not enough to stop it.

In a conventional Class A fire, such as burning wood, paper, or fabric, cooling the material below its ignition temperature and cutting off oxygen will reliably extinguish the fire. The fuel is passive and produces no new heat once combustion is interrupted.

In a lithium-ion battery fire, the fuel is active. As cell temperature rises, internal reactions accelerate, producing more heat, more flammable gas, and more pressure. This feedback loop is thermal runaway. It can sustain the fire even while external suppression is being applied.

A second difference is reignition risk. A standard fire that has been visibly extinguished is generally stable. A lithium-ion battery that has been visibly extinguished may still hold residual heat and reactive chemistry, and it can reignite minutes or even hours later. Extinguishing the flames is not the same as stabilising the battery. Post-incident monitoring is essential, and agents that stay in contact with hot battery surfaces are better suited to this fire type than agents that only knock down flames. Understanding how gel-based suppression works on battery surfaces helps explain why water or powder alone can fall short in some scenarios.

What fire suppression agents are effective on lithium-ion battery fires?

The most effective agents cool the battery rapidly, stay in contact with hot surfaces, and address reignition risk as well as visible flames. Water provides cooling and is widely used, but it can run off hot surfaces quickly. Agents that combine high water content with surface adhesion perform better where sustained cooling is needed.

Dry powder and CO2 extinguishers can suppress visible flames but provide little or no cooling, so they do not address the internal heating that drives thermal runaway. Reignition after powder or CO2 application is a well-documented risk.

Foam presents a different problem. Some formulations improve surface adhesion compared with water alone, but many conventional foams contain PFAS. These are persistent environmental contaminants and are being phased out under European regulation. PFAS-containing agents also create contaminated runoff that raises its own environmental and disposal challenges.

Hydrogel, developed by Anogas, is a water-based agent containing modified natural clay. It cools the battery, and its viscosity increases on contact with heat. This is intended to keep the agent on hot surfaces instead of running off. Hydrogel has been tested to NTA 8133 as a portable extinguisher for lithium-ion battery fires. That result applies to the specific extinguisher model and test scope. It is not approval for every battery type, battery size, or installed system.

Hydrogel’s reach depends on access. An externally applied agent will not necessarily reach cells inside an enclosed pack or stop every internal reaction. Performance depends on the battery configuration, enclosure design, how the agent is delivered, and the available evidence. Anogas also offers Hydrogel Shield, intended for longer-term containment to help prevent reignition of damaged or extinguished batteries, and Hydrogel SubZ, a frost-protected formulation for cold-temperature applications. Hydrogel itself is for cooling and initial fire suppression. It contains no intentionally added PFAS. To compare specifications and application data, see the full technical profile of Hydrogel.

See where Hydrogel fits your fire-safety strategy
From lithium-ion batteries to existing water-based suppression systems, speak with Anogas about your application.

Discuss your application

How can businesses reduce their lithium-ion battery fire risk?

Businesses can reduce lithium-ion battery fire risk by combining three elements: sound storage and charging practices, suppression equipment suited to the hazard, and trained response protocols. No single measure is sufficient on its own.

On the prevention side, control charging conditions and monitor battery condition. Charge batteries only with manufacturer-approved chargers and do not leave them charging unattended overnight. Inspect them regularly for physical damage, swelling, or unusual heat. Isolate damaged batteries and dispose of them through proper channels instead of keeping them in service.

Storage layout matters. Whether batteries are in products, vehicles, or energy storage systems, store them away from combustible materials, in well-ventilated areas, with enough separation between units to limit propagation from one battery to another. Facilities holding large volumes of battery-powered products should carry out a specific fire risk assessment that accounts for cascading cell failure.

Select suppression equipment for the fire type. Assess the battery configuration, enclosure, access, agent quantity, and discharge arrangement before choosing equipment. Place handheld extinguishers suited to lithium-ion battery fires, such as portable extinguisher solutions using Hydrogel, where batteries are charged and stored. Review fixed systems in high-risk areas such as warehouses, recycling facilities, and EV charging areas to confirm they can deliver enough agent and sustained cooling for a battery fire. Do not assume an existing sprinkler system will work with Hydrogel. Verify compatibility and any required approvals before making changes. Organisations operating at scale can also evaluate integrated fire suppression systems designed for battery fire environments.

Finally, train staff. Employees should understand that a lithium-ion battery fire behaves differently from a standard fire. Visible extinguishment does not mean the hazard has passed, and the affected battery needs monitoring afterwards. Restrict access, allow for residual heat and gas hazards, and do not treat a battery as safe to reuse, store, transport, or dispose of until it has been assessed. Set out clear evacuation procedures and escalation protocols, including when to call emergency services instead of attempting suppression.

Related Articles

Harry Verbakel