Why PFAS-Free Fire Suppression Matters for Fire Safety Professionals

Fire safety professionals across Europe are navigating a significant regulatory shift. The substances that have underpinned foam-based fire suppression for decades, per- and polyfluoroalkyl substances (PFAS), are being phased out under European law. For distributors, specifiers, and fire safety teams, this creates a compliance challenge. It also prompts a fresh look at what effective, responsible fire suppression means in 2026.

The pressure is not abstract. Regulation (EU) 2025/1988 sets a clear trajectory toward a complete ban on PFAS-containing extinguishing agents by 2031. The industries most exposed to that deadline are often the same ones facing a separate and growing risk: lithium-ion battery fires. Anyone operating in the fire safety sector needs to understand why PFAS-free suppression matters and what it must deliver to replace conventional agents.

How PFAS Regulations Are Reshaping Fire Safety Standards

European regulators have spent years building the scientific and legislative case against PFAS. These synthetic compounds are highly persistent and do not break down in the environment. They accumulate in soil, contaminate groundwater, and concentrate in living organisms over time. In fire suppression, the concern centres on PFAS-containing foams. These foams have long been valued for forming a rapid, smothering film over liquid fuel fires, but that performance came with an environmental cost that regulators are no longer willing to accept.

Regulation (EU) 2025/1988 formalises the phase-out, with a complete ban on PFAS-containing extinguishing agents scheduled for 2031. The window to transition is defined, but it is narrowing. Manufacturers, distributors, and procurement teams should evaluate every fire suppression product they specify or stock for its regulatory position over the next five years as well as its current performance. A PFAS-containing agent purchased now may become non-compliant before the end of its service life.

The regulatory direction is also influencing procurement beyond Europe. As international markets align with European chemical standards, the commercial case for PFAS-free alternatives strengthens globally. Fire safety professionals who build PFAS-free suppression into their portfolios and specifications now will be ahead of a compliance curve that is likely to reach most major markets.

See where Hydrogel fits your fire-safety strategy
From lithium-ion batteries to existing water-based suppression systems, speak with Anogas about your application.

Discuss your application

Industries Most Exposed to PFAS Compliance Risk

Exposure to the PFAS transition varies by sector. Several industries face two pressures at once: regulation of their suppression agents and a rising fire risk from lithium-ion battery systems.

Warehousing, Logistics, and E-Mobility

Warehousing and logistics operations now use electric forklifts, automated guided vehicles, and e-bikes at scale. Each carries lithium-ion battery packs that can enter thermal runaway if mechanically damaged, overcharged, or exposed to heat. A single event can spread to neighbouring cells and generate heat that is difficult to manage with water alone. If the same site also holds PFAS-containing foam systems for fuel fire protection, it faces both a compliance problem and a performance question.

Maritime, Recycling, and Energy Storage

Maritime operators, recycling facilities, and industrial energy storage installations share a similar profile. These environments often rely on foam-based suppression for liquid fuel or mixed-material fire risks. At the same time, they are accumulating lithium-ion battery systems, whether in vessel propulsion, waste processing equipment, or grid-scale storage. Legacy PFAS infrastructure combined with emerging battery fire risk gives these sectors a strong reason to review their suppression approach as a whole.

Building managers and EV charging providers face a related challenge on a smaller, more distributed scale. As charging points spread across car parks, residential buildings, and commercial premises, charging-related fire risk becomes a mainstream building safety consideration rather than a specialist industrial one.

What PFAS-Free Agents Must Deliver to Match Performance

Replacing a PFAS-containing agent is not simply a matter of removing a chemical and substituting water. Water has real strengths, particularly its cooling capacity, but it has limits in lithium-ion battery fires, where cooling must be sustained and heat transfer to neighbouring cells must be controlled.

Lithium-ion battery fires differ from conventional fires because the energy driving the incident sits inside the cells. Mechanical damage, overheating, or improper charging can destabilise a cell and start thermal runaway. In this self-sustaining sequence, rising temperature decomposes internal materials and releases flammable gases, including hydrogen and methane, along with toxic and corrosive hydrogen fluoride. Pressure builds, the cell casing can rupture, and heat passes to neighbouring cells. Temperatures can reach approximately 850 to 1,500 degrees Celsius. Gas release and internal heating can continue after visible flames have gone out.

This matters for the choice of agent. Extinguishing visible flames does not mean the battery is stable. A credible PFAS-free agent needs to cool the source quickly and keep cooling it, limit heat transfer to neighbouring cells, and support the control of flammable and toxic gases. It also has to reduce the risk of reignition, which remains one of the hardest parts of battery fire management. An agent that meets only some of these needs is compliant, but it may leave gaps in the scenarios where they matter most.

See where Hydrogel fits your fire-safety strategy
From lithium-ion batteries to existing water-based suppression systems, speak with Anogas about your application.

Discuss your application

Hydrogel as a PFAS-Free Suppression Solution

Anogas developed Hydrogel to address lithium-ion battery fires without relying on PFAS. It is a water-based agent containing modified natural clay. Analytical testing found PFAS below 1 ppb, the detection limit of the method used. Analytical non-detection is not proof of absolute absence, and PFAS-free status is a separate question from firefighting performance or overall safety.

Hydrogel is a low-viscosity liquid at ambient temperature, so it can be applied through standard water-based systems. On contact with hot surfaces, it thickens into a viscous gel. This heat-responsive viscosity is intended to keep the agent in contact with hot surfaces rather than letting it run off as water does, which supports sustained cooling where it is applied.

How Hydrogel Works, and Where Its Limits Lie

Hydrogel is designed to cool the fire source and suppress flames through its high water content. The gel that forms on hot surfaces can act as a thermal barrier, which may help limit heat transfer to neighbouring cells. It is also intended to reduce flammable gas concentrations and to interact with hydrogen fluoride. The modified clay may contribute to longer-term stabilisation, because clay particles can bind reactive lithium ions where the gel reaches damaged cell structures.

Performance depends on access. An externally applied agent may not reach cells inside an enclosed pack, and it cannot be assumed to stop every internal reaction. Results depend on battery configuration, enclosure design, agent delivery, and the evidence available for the specific application. Hydrogel does not guarantee that reignition will not occur. For longer-term containment of damaged or extinguished batteries, Anogas offers a separate product, Hydrogel Shield, which is intended to help prevent reignition. Read more about re-ignition prevention.

Hydrogel has been tested to KIWA NTA 8133 for lithium-ion battery fire applications. When reviewing any certification, verify the specific extinguisher model, test scope, and limitations. A passed portable-extinguisher test is not approval of a complete installation. It supplies the product as a ready-to-use premix that needs no on-site dilution, and it is designed to be interchangeable with water in water-based systems. Even so, do not assume an existing sprinkler or fixed system works with Hydrogel. Assess nozzle arrangement, coverage, agent quantity, operating temperature, compatibility, and any approvals required before making changes. More detail on how Hydrogel works is available for those evaluating it for a specific application.

Environmental and Commercial Advantages for Distributors

For distributors reviewing their portfolios in light of the PFAS transition, Hydrogel combines environmental credentials with commercial differentiation. Keep the underlying claims distinct: chemical composition, environmental safety, and firefighting performance each need their own evidence.

On composition, the product is made primarily of water and modified natural clay and contains no intentionally added PFAS, in line with current and anticipated European chemical legislation. Aquatic toxicity studies conducted to OECD guidelines found Hydrogel non-toxic to the environment. Because the gel adheres to hot surfaces longer than water, less agent may be needed per incident in suitable applications. This can reduce contaminated runoff. After a service life of more than ten years, Hydrogel is expected to be recyclable as a compost-enrichment supplement. The Hydrogel product page sets out the full sustainability profile for distributors conducting due diligence.

Commercially, the timing is favourable. Tightening PFAS regulation, rising lithium-ion battery fire incidents, and growing customer attention to environmental compliance are creating demand for products like Hydrogel. Distributors can offer a PFAS-free option for battery fire risks in warehousing, maritime, recycling, energy storage, and building management. It should sit within the wider fire-safety response, not replace mandatory protection, and any change to existing systems should be checked with engineering and approval bodies.

The product is supplied in formats suited to different distribution and end-user needs, from 25-litre jerrycans to 1,000-litre IBCs. It is used in handheld extinguishers and fixed suppression systems. Its regulatory position strengthens as PFAS legislation tightens, which gives distributors a durable basis for a forward-looking portfolio.

Related Articles

Harry Verbakel